العودة إلى Mitsubishi
Mitsubishi logo

ملخص ورقة البيانات

DIAION WA30C

PDF datasheet mirror for DIAION WA30C (Mitsubishi). Verify with OEM before design.

Summary

Product identification

  • Grade Name: DIAION™ WA30C
  • Type: Weak Base Anion
  • Matrix: Styrene-DVB, Highly Porous
  • Functional Group: Tertiary Amine
  • Ionic Form: Free Base

DIAION™ WA30C is a highly porous type weakly basic anion exchange resin with tertiary amine functionality and low-leachable properties. It is recommended for a wide range of applications, especially in higher purity water treatment.

Operating limits

  • Maximum Operating Temperature: 100 ℃
  • Operating pH Range: 0 - 9

Recommended Operating Conditions

  • Minimum Bed Depth: 800 mm
  • Service Flow Rate: 10 - 40 m/h
  • Regenerant: NaOH
  • Regenerant Concentration: 1 - 4 % NaOH
  • Regenerant Level: 120 % of ionic load
  • Regenerant Flow Rate: 2 - 6 m/h
  • Total Rinse Requirement: 5 - 10 BV

Typical Properties

  • Shipping Density: 650 g/L
  • Mean Particle Size: 700 μm
  • Particle Density: 1.05 g/mL
  • Total Swelling (FB to Cl⁻): 23 %
  • Whole Bead Count: 95 min.
  • Total Exchange Capacity: 1.5 meq/mL min.
  • Water Content: 43 - 55 %
  • Particle Size Distribution on 1180 μm: 5 % max.
  • Particle Size Distribution thr. 300 μm: 1 % max.
  • Effective Size: 0.40 mm min.
  • Uniformity Coefficient: 1.6 max.
  • COD: 5 ppm max.

Hydraulic Characteristics

The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ WA30C resin in normal down flow operation is shown in the graphs in the original document.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

أُعد المحتوى من مراجع تقنية عامة للبحث والمقارنة الأولية. لا يغني الملخص عن ورقة بيانات حالية معتمدة من الشركة المصنعة. تحقق من الإصدارات وحدود التصميم قبل الاستخدام.