ملخص ورقة البيانات
DIAION UBKN1
PDF datasheet mirror for DIAION UBKN1 (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ UBKN1
- Type: Strong Acid Cation
- Matrix: Styrene-DVB, Gel
- Functional Group: Sulfonic acid
- Ionic Form: H⁺
Typical Properties
- Cross-linkage: 14%
- Shipping Density: 815 g/L
- Particle Density: 1.27 g/mL
- Total Swelling (Na⁺ to H⁺): 5 %
- Whole Bead Count: 95 % min.
- Salt Splitting Capacity: 2.4 meq/mL min.
- Water Content: 37 - 43 %
- Average Diameter: 650 ± 50 μm
- Particle Size Distribution on 850 μm: 0.5 % max.
- Particle Size Distribution 425 - 850 μm: 99 % min.
- Particle Size Distribution thr. 425 μm: 2 % max.
- Uniformity Coefficient: 1.2 max.
- Ionic Conversion (H⁺): 99 % eq% min.
- Ionic Conversion (Na⁺): 0.1 % eq% max.
- Metal Content (Ca): 50 mg/L max.
- Metal Content (Pb): 10 mg/L max.
- Metal Content (Fe): 50 mg/L max.
- Metal Content (Cu): 10 mg/L max.
- Water Extractables: 0.1 g/L-R max.
- Batch Extractable TOC: 10 mg/L max.
Recommended Operating Conditions
- Maximum Operating Temperature: 120 ℃
- Operating pH Range: 0 - 14
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 40 m/h
Regeneration
- Regenerant: HCl or H₂SO₄
- Regenerant Concentration:
- HCl: 4 - 10 %
- H₂SO₄: 1 - 4 %
- Regenerant Level: 30 - 150 g/L
- Regenerant Flow Rate: 2 - 10 m/h
- Total Rinse Requirement: 2 - 10 BV
Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth is shown in the graphs in the official PDF.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
أُعد المحتوى من مراجع تقنية عامة للبحث والمقارنة الأولية. لا يغني الملخص عن ورقة بيانات حالية معتمدة من الشركة المصنعة. تحقق من الإصدارات وحدود التصميم قبل الاستخدام.