ملخص ورقة البيانات
DIAION UBK10B
PDF datasheet mirror for DIAION UBK10B (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ UBK10B
- Type: Strong Acid Cation
- Matrix: Styrene-DVB, Gel
- Functional Group: Sulfonic acid
- Ionic Form: Na⁺
DIAION™ UBK10B is a cation exchange resin with a uniform particle size and 10% cross-linkages. It is recommended for condensate mineralization in power plants.
Operating limits
- Maximum Operating Temperature: 120 ℃
- Operating pH Range: 0 - 14
Feed water
Recommended Operating Conditions
- Service Flow Rate: 10 - 40 m/h
- Minimum Bed Depth: 800 mm
Regenerant
- Regenerant: HCl, H₂SO₄
- Regenerant Concentration: 4 - 10 % HCl, 1 - 4 % H₂SO₄
- Regenerant Level: 30 - 150 g/L
- Regenerant Flow Rate: 2 - 10 m/h
- Total Rinse Requirement: 2 - 10 BV
Product water
Specification
- Whole Bead Count: 95 % min.
- Salt Splitting Capacity: 2.2 mmol/mL min.
- Water Content: 35 - 45 %
- Particle Size Distribution (0.500 - 0.850 mm): 95 % min.
- Particle Size Distribution (thr. 0.500 mm): 1 % max.
- Effective Size: 0.55 - 0.70 mm
- Uniformity Coefficient: 1.1 max.
- Sphericity after osmotic-attrition: 90 % min.
Typical Properties
- Apparent Density: 0.80 - 0.90 g/mL
- Particle Density: 1.30 - 1.36 g/mL
- Average Diameter: 650 μm
- Total Swelling (Na⁺ to H⁺): 8 %
Mechanical / hydraulic
- Hydraulic Characteristics: Approximate pressure drop is shown in graphs in the official PDF for various temperatures and flow rates per meter of bed depth in normal downflow operation.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
أُعد المحتوى من مراجع تقنية عامة للبحث والمقارنة الأولية. لا يغني الملخص عن ورقة بيانات حالية معتمدة من الشركة المصنعة. تحقق من الإصدارات وحدود التصميم قبل الاستخدام.