العودة إلى Mitsubishi
Mitsubishi logo

ملخص ورقة البيانات

DIAION UBK08

PDF datasheet mirror for DIAION UBK08 (Mitsubishi). Verify with OEM before design.

Summary

Product identification

  • Grade Name: DIAION™ UBK08
  • Type: Strong Acid Cation
  • Matrix: Styrene-DVB, Gel
  • Functional Group: Sulfonic acid
  • Ionic Form: Na⁺

Operating limits

  • Maximum Operating Temperature: 120 ℃
  • Operating pH Range: 0 - 14
  • Minimum Bed Depth: 800 mm

Service and regeneration

  • Service Flow Rate: 10 - 40 m/h
  • Regenerant: HCl, H₂SO₄
  • Regenerant Concentration:
    • HCl: 4 - 10 %
    • H₂SO₄: 1 - 4 %
  • Regenerant Level: 30 - 150 g/L
  • Regenerant Flow Rate: 2 - 10 m/h
  • Total Rinse Requirement: 2 - 10 BV

Specification

  • Whole Bead Count: 90 min.
  • Salt Splitting Capacity: 2.0 min. meq/mL
  • Water Content: 43 - 49 %
  • Average Diameter: 600 ± 50 μm
  • Uniformity Coefficient: 1.10 max.
  • Shipping Density: 840 g/L
  • Particle Density: 1.28 g/mL
  • Total Swelling (Na⁺ to H⁺): 9 %

Hydraulic Characteristics

The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ UBK08 resin in normal down flow operation is shown in the graphs in the original document.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

أُعد المحتوى من مراجع تقنية عامة للبحث والمقارنة الأولية. لا يغني الملخص عن ورقة بيانات حالية معتمدة من الشركة المصنعة. تحقق من الإصدارات وحدود التصميم قبل الاستخدام.