العودة إلى Mitsubishi
Mitsubishi logo

ملخص ورقة البيانات

DIAION SKNUPB

PDF datasheet mirror for DIAION SKNUPB (Mitsubishi). Verify with OEM before design.

Summary

Product Identification

  • Grade Name: DIAION™ SKNUPB
  • Type: Strong Acid Cation
  • Matrix: Styrene-DVB, Gel
  • Functional Group: Sulfonic acid
  • Ionic Form: H⁺

Operating Limits

  • Maximum Operating Temperature: 120 ℃
  • Operating pH Range: 0 - 14
  • Minimum Bed Depth: 800 mm
  • Service Flow Rate: 10 - 40 m/h

Regenerant Conditions

  • Regenerant: HCl, H₂SO₄
  • Regenerant Concentration:
    • HCl: 4 - 10 %
    • H₂SO₄: 1 - 4 %
  • Regenerant Level: 30 - 150 g/L
  • Regenerant Flow Rate: 2 - 10 m/h
  • Total Rinse Requirement: 2 - 10 BV

Specification

  • Whole Bead Count: 90 min. %
  • Salt Splitting Capacity: 1.7 min. meq/mL
  • Water Content: 50 - 60 %
  • Particle Size Distribution on 1180 μm: 5 max. %
  • Particle Size Distribution thr. 300 μm: 1 max. %
  • Effective Size: 0.40 min. mm
  • Uniformity Coefficient: 1.6 max.
  • Ionic Conversion (H⁺): 95 min. eq%

Typical Properties

  • Shipping Density: 790 g/L
  • Mean Particle Size: 700 μm
  • Particle Density: 1.20 g/mL
  • Total Swelling (Na⁺ to H⁺): 9 %

Hydraulic Characteristics

The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ SKNUPB resin in normal down flow operation is shown in the graphs within the original document.

Disclaimer This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

أُعد المحتوى من مراجع تقنية عامة للبحث والمقارنة الأولية. لا يغني الملخص عن ورقة بيانات حالية معتمدة من الشركة المصنعة. تحقق من الإصدارات وحدود التصميم قبل الاستخدام.