ملخص ورقة البيانات
DIAION SK110
PDF datasheet mirror for DIAION SK110 (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ SK110
- Type: Strongly acidic cation exchange resin
- Matrix: Styrene-DVB, Gel
- Functional Group: Sulfonic acid
- Ionic Form: Na⁺
Operating limits
- Maximum Operating Temperature: 120 °C
- Operating pH Range: 0 - 14
Feed water
- Service Flow Rate: 10 - 40 m/h
- Minimum Bed Depth: 800 mm
Regeneration
- Regenerant: HCl or H₂SO₄
- Regenerant Concentration:
- HCl: 4 - 10 %
- H₂SO₄: 1 - 4 %
- Regenerant Level: 30 - 150 g/L
- Regenerant Flow Rate: 2 - 10 m/h
- Total Rinse Requirement: 2 - 10 BV
Specification
- Whole Bead Count: 90 % min.
- Salt Splitting Capacity: 2.0 meq/mL min.
- Water Content: 35 - 45 %
- Particle Size Distribution on 1180 μm: 5 % max.
- Particle Size Distribution through 300 μm: 1 % max.
- Effective Size: 0.40 mm min.
- Uniformity Coefficient: 1.6 max.
Typical Properties
- Shipping Density: 850 g/L
- Mean Particle Size: 730 μm
- Particle Density: 1.32 g/mL
- Total Swelling (Na⁺ to H⁺): 8 %
Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ SK110 resin in normal down flow operation is shown in the graphs in the original document.
Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
أُعد المحتوى من مراجع تقنية عامة للبحث والمقارنة الأولية. لا يغني الملخص عن ورقة بيانات حالية معتمدة من الشركة المصنعة. تحقق من الإصدارات وحدود التصميم قبل الاستخدام.