العودة إلى Mitsubishi
Mitsubishi logo

ملخص ورقة البيانات

DIAION SA10A

PDF datasheet mirror for DIAION SA10A (Mitsubishi). Verify with OEM before design.

Summary

Product identification

  • Grade Name: DIAION™ SA10A
  • Type: Strong Base Anion
  • Matrix: Styrene-DVB, Gel
  • Functional Group: Type I (trimethyl ammonium groups)
  • Ionic Form: Cl⁻

Specification

  • Whole Bead Count: 90 min. %
  • Salt Splitting Capacity: 1.3 min. meq/mL
  • Water Content: 43 - 47 %
  • Particle Size Distribution on 1180 μm: 5 max. %
  • Particle Size Distribution thr. 300 μm: 1 max. %
  • Effective Size: 0.40 min. mm
  • Uniformity Coefficient: 1.6 max. -
  • Shipping Density: 670 g/L
  • Mean Particle Size: 670 μm
  • Particle Density: 1.08 g/mL

Typical Properties

  • Total Swelling (Cl⁻ to OH⁻): 23 %

Recommended Operating Conditions

  • Maximum Operating Temperature: 80 °C (Cl⁻ form), 60 °C (OH⁻ form)
  • Operating pH Range: 0 - 14
  • Minimum Bed Depth: 800 mm
  • Service Flow Rate: 10 - 60 m/h
  • Regenerant: NaOH
  • Regenerant Concentration: 2 - 8 % NaOH
  • Regenerant Level: 50 - 200 g/L
  • Regenerant Flow Rate: 2 - 8 m/h
  • Total Rinse Requirement: 2 - 10 BV

Hydraulic Characteristics

The approximate pressure drop at various temperatures and flow rates for each meter of bed depth is shown in graphs within the original document.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

أُعد المحتوى من مراجع تقنية عامة للبحث والمقارنة الأولية. لا يغني الملخص عن ورقة بيانات حالية معتمدة من الشركة المصنعة. تحقق من الإصدارات وحدود التصميم قبل الاستخدام.