ملخص ورقة البيانات
DIAION PA418L
PDF datasheet mirror for DIAION PA418L (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ PA418L
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Porous
- Functional Group: Type II (dimethylethanol ammonium groups)
- Ionic Form: Cl⁻
DIAION™ PA418L is a porous type strongly basic anion exchange resin with 9% cross-linkages. It is recommended for manufacturing pure water and wastewater treatment.
Recommended Operating Conditions
- Maximum Operating Temperature:
- 60 °C (Cl⁻)
- 40 °C (OH⁻)
- Operating pH Range: 0 - 14
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
- Regenerant: NaOH
- Regenerant Concentration: 2 - 8 % NaOH
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
- Total Rinse Requirement: 2 - 10 BV
Typical Properties
- Shipping Density: 680 g/L
- Mean Particle Size: 710 μm
- Particle Density: 1.11 g/mL
- Total Swelling (Cl⁻ to OH⁻): 11 %
- Whole Bead Count: 95 % min.
- Salt Splitting Capacity: 1.3 meq/mL min.
- Water Content: 38 - 44 %
- Particle Size Distribution on 1180 μm: 5 % max.
- Particle Size Distribution thr. 425 μm: 5 % max.
- Effective Size: 0.45 mm min.
- Uniformity Coefficient: 1.6 max.
Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ PA418L resin in normal down flow operation is shown in the graphs in the original document.
Disclaimer This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
أُعد المحتوى من مراجع تقنية عامة للبحث والمقارنة الأولية. لا يغني الملخص عن ورقة بيانات حالية معتمدة من الشركة المصنعة. تحقق من الإصدارات وحدود التصميم قبل الاستخدام.